How to Remove Slime from Inside a Tire Without Damaging It?


Tire sealant has been a blessing with so many noticeable benefits that users are in love with this thing. And why won’t they be? Slime is a great thing to help you with protecting those tires from tears and slits.

On the way, you may face many problems including a sudden tear on the tire due to a rock on the road or any similar story. And having the slime inside your bag will be an assurance that things can be sorted.

However, with using slime for tire, there’s a lot of need that may show up suddenly with a question on your mind. For example, if a clog starts to build up inside of your tire and so, you need to remove the slime.

And so, we are going to talk about how to remove slime from inside a tire today.

Elaborating How to Remove Slime from Inside a Tire.

It’s not a very hassling process and easy to follow. So, don’t worry. We have even designed this entire content to discuss in-depth part by part for each phase of this process. This will help our never-did-this-before readers hopefully.

Clean the Tire and Rim

One thing you want to do for learning how to remove slime from inside a tire is cleaning. Before starting the actual process, you want to use a dry rag for cleaning the tire and rim.

If you leave your tire and rim unclean, it will cause your hand to get dirty when doing the other steps. So, it’s better to clean the tire and the center of the rim. For that, you want to take the dry rag or cloth to rub the surface to avoid dirt. You can also wear a glove for extra protection.

If you want to, you can use a water and liquid soap mixture solution in the spray bottle with the rag. Try spraying first and then with the rag rub the rim and tire to clean.

Make sure you have dried out the surface for not harming to the rim and tire. After you have cleaned the tire and rim, go to the next step.

Detach the Tire from the Rim

The next thing you want to do is to remove the tire from the rim so that you can get rid of the slime attaching. Without a doubt, the tire should be attached to the rim via the slime, and to remove the slime, it’s vital to remove them as carefully as possible.

For that, you want to lay the tire or stand it in the ground and remove the valve stem cap. And then, press down the tire from its side to side so that the slime loosens up from the rim sidewalls. That will result in the tire to be released easily.

Then, you want to on the one side of the tire to take out the tire from the sidewall carefully and slowly. Do the same thing to the other part of the tire for detaching. If you have done detaching the tire from the rim, rush to the next step.

Wipe the Excess Liquid Slime

After that you have detached the tire from the rim, you will notice slime is all over the tire that needs to be cleaned.

Even if you have cleaned the excess slime, there will be some slime attached to your tire and rim which you want to get rid of too. When you have seen the fluid, make sure to use another clean cloth for wiping it.

You can also clean the excess liquid slime by washing them down. To clean with water, you don’t need to use any mixture to remove the excess slime. If you have tried this technique, you want to follow the next step too. If not, skip the following step.

Dry Outside for Some Hours

Once you have wiped the excess slime from the tire, it’s the right time to dry it outside for some while. The best thing you want to do is to hang the tire outside to get heat and naturally absorb the water that you have used for cleaning. After you see the tire is fully dry out, run to the next step.

Use Sticky Stuff Remover to Take Away Sticky Slim

Then, use the sticky stuck removal to get rid of the rough slime marks that is visible on the tire. If you don’t have sticky stuck removal, it’s better to buy one from the nearest market to do continue.

To do it in the right way, you want to apply by taking a small amount of sticky stuff remover in a cotton pad and wipe the tire gently.

Then, wait for a while so that it could reach all the way throughout. After that, softly wipe off the slime and repeat the process to the other side too.

Use Degreaser to Get Rid of the Leftover Slim

And then, you want to use a powerful degreaser that should remove the leftover slime to give a perfect removal. So, use any of your favorite degreaser with a cotton pad or cloth and wipe it until the slim is fully removed from the tire.

Attach the Tire by Pressing Down

Afterward, you can attach the tire with your hand by pressing it down from both parts. And, you are done.

Wrap Up.

And that’s pretty much everything you should know on how to remove slime from inside a tire. Follow the steps and pointers that we mentioned for the safe removal of slime from inside the tire. And things should be good by the end of this process.

Don’t rush into any part, give it the necessary time. The results won’t be disappointing that way.

Recent Content