The common question you might notice on various peloton bike forums and communities is how to calibrate a peloton bike. Yes, there is a lot of confusion about calibration among the user. The main reason behind this is Peloton directly doesn’t support or recommend the calibration.
But, As a user, you need to calibrate your bike for a comfortable ride after a while. Otherwise, You won’t have fun while cycling. Also, you need to provide lots of pressure to your knees for pushing the pedals, which is quite impossible.
If you’re facing this problem, this dedicated article is for you. I’ll provide you a brief guide about peloton bike calibration and how you can do it yourself.
What is Peloton Bike Calibration?
Calibration provides the rider feedback about her or his efforts on the workout. You’ll get two physical sensors on your peloton bikes. They are “Resistance” and “Cadence.” The calibration process works with the Resistance sensor. The resistance indicates how much force you need to provide to turn the peloton flywheel. It’ll show as a percentage on the screen.
The Peloton bike calibration means setting the bike magnet position according to resistance-specific measurements. The strength required to move your crank in a circular motion or get the resistance back to predetermined peloton measurements. That matches with other bikes in the community.
Also, You’ll find output that is far behind what you expect or far better, which you cannot believe. That means you need to calibrate your bike.
Do peloton bikes need to be calibrated?
According to the Peloton Official Statement: You don’t need to calibrate your peloton bike. It comes factory-calibrated to minimize the resistance between bikes. Also, They don’t recommend doing the calibration process on the user’s own because they can’t set it properly and don’t find accurate output.
Another possible reason is that if you ride a properly calibrated bike, then you cannot touch your previous PR’s. That makes some people demotivate, and it leads to not riding the bike. Also, It affects Peloton’s annual revenue. So, This might be the main reason why they don’t recommend calibrating.
But, If you shift to a new place, you need to calibrate your bike. Because Sometimes calibration gets out of whack due to the flywheel getting knocked or for other causes.
Otherwise, You’ll find everything that happens wrong with you. For example, if you don’t calibrate the bike, then you’ll notice that resistance levels fell off. For this, You won’t find any fun when riding the bike. Also, You might notice that the bike doesn’t provide you any benefit as it can be operated so easily.
When pedaling around at 50 resistance, you’ll feel like you’re riding at 80 resistance. So, You’ll get pain in the knees from pushing the pedals. To avoid such conditions, you need to recalibrate your bike.
How often should I calibrate my Peloton?
If you set up the bike properly when it is delivered, you don’t need to think about calibrating for at least several months. Also, It depends on what type of class you’re doing and how aggressively you use the bike.
According to the peloton statement, You can use a peloton bike without recalibrating. But, The bikes are recalibrated every 10 days in the studio classes. So, It’s better to recalibrate your bike every few months as you’re a single user.
Is the Calibration Process Same For Peloton Bike and Bike Plus?
You can’t calibrate the peloton bike like bike plus because The bike plus has an auto-calibrated feature that is missing on the bike. Also, You don’t need any calibration tool to fix it as its resistance auto-follows on the screen.
In addition, The person who brings the bike plus for you, he or she will provide you with a complete guide on how to calibrate the bike plus through the display. But, the Peloton company doesn’t recommend doing calibration for the bike.
The process of calibrating a bike plus is really simple compared to a bike. Just jump into the “Setting Menu,” and you’ll find the calibration option and tab the screen. Now your task is to relax, and the bike plus does the rest for you.
How To Calibrate Peloton Bike?
Here is the step-by-step process, how you can calibrate your peloton bike.
- A wedge. Don’t worry! You’ll get this by Peloton without any cost.
- Also, two piece discs which include with wedge. One will be smaller than the other one.
Step 1: First, set up the wedge on the flywheel. The next thing you need to do is open up the bracket and start to slide the wedge with a little resistance. It’ll create friction between the wedge and flywheel. Move until it stops and sits with the second magnet.
Step 2: Now, move into the knob and take the larger disc. You notice a black color sleeve over the flat edge of the knob. First, Pull up the sleeve and Place the larger disc in the knob. Now, You rotate the disc until it sits itself on the flat part. Next, check whether the disc is properly locked or not. If you do this correctly, follow the next step or repeat it again.
Step 3: Now, take the smaller disc and slide up the sleeve. The disc is a little bit smaller than the post diameter. So, You need to push it. After pushing it, You’ll hear a clicking sound.
Step 4: You’ll notice 4 markings on both discs. You’ll need to turn each quarter when the screen instructs you to do so.
Step 5: Now go to the screen and hit the “About” button. After a pop-up box opens, rapidly click on the upper right-hand part of the box, and the calibration page appears. You’ll notice a red button labeling with “Get Started,” click on it. Then again, click the “Next” button.
Step 6: Now, You’ll find a total of 31 clear dots on the screen. First, Provide a quarter turn on the knob. Next, click on the “Set” button. Then you’ll notice that the first clear dot turns red.
Step 7: Follow “Step 6” again and again until all the dots turn red. After you complete the final one, The confirmation screen will appear, and it will show “Calibration Complete.”
Step 8: Now, Reset the bike to complete the process. You can do it by clearing bike data and cache. Now, check the bike’s new resistance levels and whether you feel better or not.
Step 9: Congratulations, You’re successfully calibrated your bike.
Does The Peloton Bike Come With Calibration Tools?
Yes, It comes with calibration tools. However, It’s not mandatory to have tools to do calibration tasks.
To do the calibration process, You get a white color wedge and two C-shaped discs. But, If you don’t get the calibration tool, contact the peloton support team, and they’ll provide you the tools.
Can You Calibrate a Peloton without a tool?
Yes, You can calibrate the bike without a tool. The calibration tools are not mandatory because you can do this process with the help of the screen. But, If you find that you can’t accurately turn the knob, you need to get the calibration tools.
How do you calibrate a peloton without a tool?
Here is a complete step-by-step process, how you can calibrate the bike without a tool.
Step 1: First, Go to the homepage of your bike screen. And, You’ll find a three dots button on the right corner. Tap on it. A new menu section will appear, and find out the “About” option and click on it.
Step 2: A pop-up box will open with your hardware information. Fill up all the details and tap multiple times on the top right corner of that pop-up box until the calibration page comes. After, Click on the “Get Started” button.
Step 3: A page will open and ask you to “turn the resistance to the left and press calibrate.” Start turning the knob as instructed and press the red “Calibrate” button. If you did this successfully, the screen showed that “Minimum calibration has been achieved.”
Step 4: Again, tap on the red button, leaving with “Calibrate maximum resistance.”
Step 5: Follow the next procedure in the next screen and turn the knob right until it doesn’t turn anymore. And, Click on the “Calibrate” button.
Step 6: Now, The screen shows you “Maximum resistance calibrated.” Now, Click on the “Done” button.
Step 7: You need to turn the knob again in the left direction and set up the further resistance level.
You’re successfully done the calibration process and check the resistance. Also, Ensure that you feel comfortable when riding it.
How Much Does It Cost To Outsource Peloton Calibration?
You don’t need to spend any money to do this. It’s all free, and you can do this on your own, both using tools or without tools. But, If you want to hire an expert for this, he will only charge the service charge, nothing much than that.
If you’re a peloton user, you’ll face the terms of calibration. Why? Because, After some time, You’ll notice that your bike won’t be easy to ride and you won’t find any comfort for some reason. For this, You might ask several facebook communities or forums about your problem. Then, You’ll discover the calibration terms.
If you find this type of problem and want to calibrate your bike, then this article will help you calibrate your peloton bike. In the above section, You already learned about peloton bike calibration and how to do it with the help of tools or without tools.
- 11 Best Shoes For Peloton Bike: Spin With The Right Pair!
- Best Water Bottle for Peloton Bike In 2020- [Top 7 Picks]
- Best Peloton Toe Cages – Top 5 Options Within Budget Means!
- 7 Best Peloton Bike Seats and Cushions For Maximum Comfort!
- The 7 Best Peloton Bike Mats To Protect Your Hard Floor!
- 7 Best Headphones for Peloton Bike – [Wireless/Bluetooth]